While often used in production machining operations, a flexible hone is a portable, yet powerful tool that can meet exacting surface finishing requirements in the field
Not much metal finishing equipment that is used in factory production setups is also readily available and applicable to situations where a precision secondary finishing is also required in the field. Yet there are many instances when deburring, edge blending, cross hatching or other forms of honing surface finishes are required in the field for installation or even emergency repair services.
For example, when Vektek, Inc. (Emporia, KS), a global supplier of hydraulic and pneumatic clamping systems for the metalworking, tool & die and mold industries sells cylinder products, the customer must ensure that the device into which the cylinder is installed has a properly finished cylinder cavity, or it will not seal and function properly.
“One of our customers, a major heavy equipment manufacturer in China, had a major problem with their fixture cavities that caused our cylinders not seal properly. These fixtures were produced for making mass produced parts,” says Rod Nelson, Vice President of Vektek International Sales. “The trouble was that the customer’s cavities were not machined suitably for installation, a flaw in their finishing process was missed. As a result, it appeared that the Vektek seals were leaking, a problem that was not a shortcoming in the cylinder design or quality, but nevertheless had to be solved at the customer’s site or these very expensive fixtures would not be useable.
“Because many times the customer’s milling processes won’t give them a good enough finish, we recommend that they use a Flex-Hone® tool to improve that finish as part of the cylinder installation process,” Nelson adds.
Gordon King, General Manager of Vektek’s Shanghai office, explains that the finishing with the flex-honing tool in the field gives the cylinder cavities a super high finish that is virtually unattainable through the use of standard cutting tools such as reamers or drills.
“There are two holes that are perpendicular to the cylinder cavity wall,” King explains. “Oil flows through these holes to different sides of the cylinder, but it must never leak past the body seals between them. The oil flows at high pressure (approximately 3,000 p.s.i.) through the lower hole, to extend the cylinder. To return the cylinder, the oil flows into the hole toward the outside of the cavity. Because the required hole size and roundness are within 0.0005 in. and the required surface finish is better than 32 roughness, imperfections such as minute scratches will create oil leaks if the holes aren’t finished correctly prior to cylinder installation.”
King adds that the consequence of a leaking cylinder could be very serious since these Vektek devices hold workpieces stationary on machining fixtures. If the oil pressure in the cylinders drops due to leakage, the grip on workpieces would fail, requiring the machine to be shut down and production to halt.
A Flex-Hone is a flexible, ball-style hone that is made by Brush Research Manufacturing for surface finishing, deburring and edge blending of products including hydraulic cylinders, where tight tolerances and smooth surface finishes are essential for sealing purposes.
This tool can be used in any rotating spindle, ranging from the machining centers of high-volume production environments to hand drill motor for secondary finishing, custom field finishing or even DIY applications.
Vektek advised technicians at the manufacturing plant in China on using the flexible hone to properly surface finish the cylinder cavities so that the sealing problem would be eliminated.
“They were leaking because the inside of the cavities were too rough,” Nelson explained. “In all, 300 cavities were Flex-Honed, and 299 of the 300 cavities were saved and polished exactly to specification. One cavity was slightly out of spec, but it also provided an adequate seal. So, in the end, we saved 300 very expensive holes.”
Nelson says the flexible hone is so useful to his customers in properly preparing cavities for his company’s products that Vektek has for many years specifically recommended the Brush Research tool in its product catalog and data sheets.
For this particular operation the Flex-Hone was mounted on a standard drill motor. King says that because this tool can be used in such portable equipment makes it all the more useful for highly polished field finishing operations.
“These cylinders require a very good seal, very accurate, very round, and with a high quality finish,” he says. “Because the flexible hone is self-centering, it is easy to get a uniform hole finish because it is always exerting the same sort of pressure on all sides. This is a true finishing operation done in the field.”
The Flex-Hone has been used successfully in many types of field operations over the years. Some examples include finishing automotive brake cylinders, drums and disc brake rotors. The tool is also used for resurfacing firearm barrels and cylinders. In a more dramatic instance, it is an indispensable method of deglazing and resurfacing the cylinder bores of large and small engines installed in cargo ships that could be stuck at sea if were not for this versatile and easy-to-use device.
Immediately recognizable by the cluster of ball-shaped abrasive globules that are attached to flexible filaments extending from a central shaft, this versatile tool is sometimes referred to as the “ball hone.”
Available in sizes ranging from very small diameter hones (4mm) to those up to 36 inches or more in diameter (a size appropriate for large engine cylinder bores), these tools can be custom designed by Brush Research to the size, shape and abrasive grit to fit an application’s needs.
In the case of Vektek cylinders, Nelson says, the Flex-Hone is recommended for use on a range of cartridge mount cavity sizes installed in customer specified materials, so the firm does not recommend hone sizes or specifications.
“Manifold mount cylinder models have a required cavity finishing operation,” he says. “They range in size from 1-1/16 in. to 1-7/8 in. We recommend that our customers consult with Brush Research to determine which specific Flex-Hone size and grit type is best for their material and application.”
The “grit” to which Nelson refers is the material composing the ball-shaped globules on the tool that do the surface finishing work. A wide variety of grit types is available, depending on the material and application of the item being surface finished.
While all of the flexible hones from Brush Research produce a soft-cutting abrading action, some applications require a non-directional micro finish while others, such as diesel engine cylinder walls, require a cross-hatched pattern (cross hatching the surface provides better lube oil distribution and retention).
In all cases the Flex-Hone Tool provides “plateau” finishing, the removal of burrs as well as torn and folded metal peaks that remain on metal surfaces after previous finishing operations. At the same time, plateau finishing retains the microscopic valleys in metal finishes in order to enhance lubrication properties.
The tool is ideal for applications such as the installation of Vektek cylinders because it is self-aligning and the self-compensating for wear, which means that even after some abrasive globules are worn, the finishing action on metal surfaces will remain even. These features save the machining center or service shop on flexible hone replacement, eliminates the need for elaborate setups, and makes it an effective and highly versatile field for use in the field.
Established in 1958, Brush Research Manufacturing has been solving difficult finishing problems with brushing technology in the sophisticated environments of nuclear energy, aerospace and computer technology as well as industrial applications. The company offers a full line of additional industrial brushes and abrasive products, a small sampling of which include power and miniature brushes, and twisted wire tools.
For more information, contact Brush Research Manufacturing, Brush Research Mfg. Co., Inc., 4642 Floral Drive, Los Angeles, CA 90022; Phone: (323) 261-2193; Fax: (323) 268-6587; email: firstname.lastname@example.org or visit the web site: www.brushresearch.com.